- Albania
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Kosovo
- Latvia
- Lithuania
- Macedonia
- Malta
- Moldova, republic of
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russian Federation
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Turkey
- Ukraine
- United Kingdom
- Antigua and barbuda
- Argentina
- Aruba
- Bahamas
- Barbados
- Belize
- Bolivia
- Brasil
- Cayman islands
- Chile
- Colombia
- Costa rica
- Cuba
- Dominica
- Dominican republic
- Ecuador
- El salvador
- Grenada
- Guadeloupe
- Guatemala
- Haiti
- Honduras
- Jamaica
- Martinique
- Montserrat
- Netherlands Antilles
- Nicaragua
- Panama
- Paraguay
- Peru
- Puerto rico
- Saint Kitts and Nevis
- Saint Lucia
- Saint Vincent and the Grenadines
- Trinidad and Tobago
- Turks and caicos islands
- Uruguay
- Virgin islands, british
- Virgin islands, U.S.
- Algeria
- Angola
- Bahrain
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cameroon
- Cape Verde
- Central African Republic
- Chad
- Comoros
- Congo
- Cote D'Ivoire
- Djibouti
- Egypt
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Iran, Islamic Republic Of
- Iraq
- Israel
- Jordan
- Kenya
- Kuwait
- Lebanon
- Lesotho
- Liberia
- Libyan Arab Jamahiriya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Mayotte
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Oman
- Qatar
- Reunion
- Rwanda
- Sao Tome and Principe
- Saudi Arabia
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- Sudan
- Swaziland
- Tanzania, United Republic Of
- Togo
- Tunisia
- Uganda
- United Arab Emirates
- Yemen
- Zambia
- Zimbabwe
- Motorcycle
- Tech and Knowledge
Technology and Knowledge: motorcycle tyre
construction and parts
While motorcycle tires have existed for more than 100 years, their appearance has changed dramatically. Modern motorcycles have little in common with early motorcycles that were modeled after bicycles. One consistent part is the tyre, which has been an integral piece of the motorcycle since its inception. Modern radial tyres made by PIRELLI are high-tech and have progressed since their introducion on motorcycles of 100 years ago. Below you will find the various constructions that PIRELLI uses today.
FIND THE
PERFECT FIT
Discover our moto tyres collection
RADIAL CARCASS CONSTRUCTION
Bead
The patented technology enables the structure of both front and rear tyre to be achieved using a radial carcass and a single layer belt made of steel. Depending on the rolling direction of the tyre, the belt is wound circumferentially around the carcass giving an angle close to 0°. The advantages of the use of steel are its extremely high rigidity and the possibility to tune the winding spacing thus differentiating the stiffness distribution from shoulder to crown.
Bead
RADIAL CROSS BELTED CONSTRUCTION
Tubeless inner liner
The main difference from the bias-belted construction is the structure of the carcass in this case is radial. This means that its cords are wrapped radially around the tyre, from one bead to the other, giving big advantages in terms of cornering stability, reduced weight and high-speed performance.
Tubeless inner liner
BIAS BELTED CONSTRUCTION
Bead
The structure consists of a conventional carcass and a belt made of two or more crossed layers. The difference between the carcass and the belt is determined by the different goals they are designed to fulfill and consequently different materials are used in the construction. The belt is made mainly from Armide and it's function is to reduce the dynamic deformation caused by centrifugal forces, while the carcass provides the tyre with its stiffness and load carrying capacity.
Bead
CROSS PLY CONSTRUCTION
Bead
Also indicated as conventional or x-ply tyre. Depending on the different speed and load specifications, the tyre carcass is structured using two or more overlapping layers. Each layer is made of rubber coated textile and the overlap angle is designed in order for the tyre to conform with the required dynamic characteristics.
Bead
Copyright © 2025
Pirelli & C. S.p.A. - Pirelli Tyre S.p.A