Designed for all winter conditions, on roads partly dry and partly icy or covered in snow

“Road” studs can be fitted, which protrude about 1/1.5 mm, which can therefore also cover long asphalted stretches without damaging the road surface.
The compounds and the tread have been developed to perform best both in the case of the application of studs for heavy snow conditions, and also - without studs - to guarantee adequate grip also on slippery surfaces and at very low temperatures.

  • Snow

SOTTOZERO™
TECHNICAL ADVICES

TYRE IDENTIFICATION MARKING
FITMENT

TYRE IDENTIFICATION

The markings that appears on the side of the tyres also tells us the basic size of the tyre, the rim diameter and the width of the rim.
We will illustrate how to read two different types of branding that may appear on the side of the rally tyres.

C: Nominal section width expressed in mm - 225
D: Nominal external diameter expressed in mm - 600
d: Nominal rim diameter of the rim, expressed in inches - 16
C: Nominal section width expressed in mm - 205
h/C: Tyre’s technical series. This expresses the ration between the section height (in mm) and the nominal section width (in mm) - 65
Radial construction - R
d: Nominal rim diameter of the rim, expressed in inches - 15

MARKING

The treads of the various versions of rally tyres are described by one or two letters followed by a number. The letters identify the type of tread. 
The number after the letter indicates the type of use, for example: RX 7

FITMENT
​Make sure that tyres are fitted by experts, with specialised dedicated machinery and equipment, who follow safety procedures.
Before mounting the tyres clean the surface of the beads and the area of the rim that comes into contact with the tyre.
Use ONLY special tyre lubricants for mounting tyres. Do NOT use silicone or petroleum lubricants.
Check the state of the valves to prevent air loss: Check the seals and the tightness for metal ones and check also for any tears or cracks in rubber seals. If necessary, replace them. When the tyre is being used, always use the valve cover top.
Follow the indications provided on the sidewall of the tyre referring to the rolling direction and the correct positioning of the internal and external sidewalls, if specified.
Use the safety cage when inflating tyres.
Before unseating the tyre from the rim during disassembly, make sure that the tyre has been fully deflated, removing the inner valve mechanism.

SOTTOZERO™
TECHNICAL DATA

tyre size version diameter(mm)D section width(mm)C tread wdt(mm)Cb rolling circumference(mm) rimE
tyre size235/40ZR18 versionSottozero 'SNOW' RALLY WRC diameter(mm)D649 section width(mm)C222 tread wdt(mm)Cb175 rolling circumference(mm)1976 rim
E
8Jx18
SAFETY WARNING: danger may result from improper use. Follow tyre manufacturer’s instructions. Refer to car manufacturer’s recommendations with respect to tyre fitment for each model.

Available sizes for you

18
235/40R18 SOTZER
17
195/45R17 SOTZER
15
165/80R15 SOTZERWM
View all sizes

PIRELLI OFFICIAL MOTORSPORT DEALERS