STANDARD TYRE - pneumatico gonfio / pneumatico sgonfio
PNEUMATICO PIRELLI RUN FLAT - pneumatico gonfio / pneumatico sgonfio


Per un automobilista Run Flat significa sicurezza.
Questo offre un miglior controllo del veicolo anche in condizioni di emergenza e consente di continuare la marcia in sicurezza anche durante una rapida perdita di pressione.

Grazie ai pneumatici Run Flat le forature non limiteranno la vostra mobilità e la vostra sicurezza, quindi, se forate sotto la pioggia battente, il Run Flat Pirelli vi offrirà il vantaggio di non dovervi fermare per la sostituzione del pneumatico, poichè è possibile continuare a guidare fino a casa o raggiungere il punto assistenza più vicino.

Perché un pneumatico Run Flat assicuri una "marcia a piatto" senza pericoli, è necessario il rispetto di certi valori massimi per velocità e distanza (80 km/h per 80 km).

Nel rispetto di tali limiti di sicurezza è fondamentale per un guidatore sapere quando avviene una perdita di pressione.



E' obbligatorio l'uso combinato di pneumatici Run Flat e di un Sistema di Monitoraggio della Pressione (TPMS) che fornisca al guidatore un segnale di allarme in tempo reale in caso di perdita di pressione, permettendo così una perfetta padronanza della situazione e assicurando, nel contempo, la possibilità di raggiungere un centro servizio che si occuperà del problema.

Is it possible to fit a self-supporting run flat tyre on standard H2 rims? If so, will it still work as a run flat tyre and what are the implications?

Yes it is possible, although Pirelli strongly recommends that EH2 rims be used because they guarantee improved retention of the tyre bead down to zero inflation pressure.

In the event of run flat operation at zero pressure with H2 rims, provided that a Pirelli self-supporting run flat tyre is used in conjunction with a Tyre Pressure Monitoring System (TPMS) or air pressure warning system, the tyre will maintain its run flat characteristics.

A TPMS is absolutely necessary to alert the driver that the tyre has lost pressure.

Can standard tyres be fitted to EH2 rims? If so, will they work as run flat tyres?

Standard tyres can be fitted to EH2 rims but they will not have run flat features.

If one of my run flat tyres sustains a puncture can I replace it with a standard tyre?

Pirelli does not recommend mixing run flat tyres and standard tyres on the same vehicle, even if paired in axle sets.
If you have a puncture, the run flat tyres are designed to permit you to reach a tyre dealer where you can have the tyre checked and replaced if necessary with another run flat tyre.

In exceptional and emergency circumstances a normal tyre with identical dimensions, load index and speed code can be fitted for a very limited period and distance.
It must be noted that standard tyres do not have the same run flat characteristics as the other tyres on your vehicle and must be removed at the earliest opportunity.

Can I mix Pirelli self-supporting run flat tyres with another brand of run flat tyre?

Yes, but Pirelli recommends that in a run flat condition you should not exceed 80km (50 miles) at a maximum speed of 80km/h (50 mph). Pirelli strongly recommends that the different tyre brands should be fitted in axle sets and the tyre pressure monitoring system must be controlled to make sure that the pressure settings are compatible.

Can I fit self-supporting run flat tyres on my car?

Run Flat tyres have been developed based on the specifications of the vehicles on which they are mounted.

Accordingly, Run Flat tyres may only be mounted on vehicles specifically manufactured to accommodate Run Flat tyres, therefore you must contact the vehicle manufacturer if you are in doubt.

Can I repair a punctured Pirelli self-supporting run flat tyre?

No, for safety reasons, Pirelli chooses not to recommend the repair of self-supporting run flat tyres.

A self-supporting run flat tyre should always be changed and not repaired after a loss of pressure because it is not always possible to establish the time and conditions under which the tyre has been used with insufficient inflation pressure.

Can I use nitrogen instead of air to inflate my self-supporting run flat tyres?


Is it possible to extend the 80km (50 miles) tyre range of a punctured run flat tyre by re-inflating the tyre?

No. After a puncture you can only travel 80km (50 miles) at a maximum speed of 80km/h (50mph), following which the tyre must be replaced.

What is the effect on performance when my self-supporting run flat tyres are used in run flat conditions?

Provided the vehicle is operated within restricted run flat speed of 80km/h (50 mph), handling is only slightly impaired due to reduced cornering force.

Aquaplaning and braking remain almost the same.
It is recommended that you avoid sharp driving manoeuvres if a tyre is completely deflated, especially if the tyres are fitted to H2 standard rims.

In run flat conditions with a Pirelli self-supporting run flat tyre, can I drive for more than 80km (50 miles) if I drive slower than 80km/h (50 mph)?

No. The maximum condition guaranteed by Pirelli is 80km (50 miles) at zero pressure at a speed not exceeding 80km/h (50mph).

For vehicles fitted with Pirelli self-supporting Run Flat tyres as original equipment, the tyre manufacturer's recommendations indicated in the owners manual apply.

How does a tyre pressure monitoring device work?

There are a range of tyre pressure monitoring systems (TPMS) available so you should consult the vehicle manufacturer if you require a specific explanation.

Basically there are two types of system, indirect systems use the fact that reduced air pressure causes the wheel to rotate at a slower speed and when they detect this difference send a warning to the driver.

Direct systems directly control tyre pressure against pre-set values and send a warning when actual pressure falls below set values.

How do I know if a tyre is self-supporting run flat?

which appears on the sidewall of the tyre. On tyres specifically homologated for BMW vehicles there are also the letters RSC which stand for Run Flat System Component.

Why vehicle handbook states that my run flat tyres can operate for 100miles (160km) but all Pirelli literature states 80km? Which is correct?

Pirelli guarantee a general maximum distance of 80km for all self-supporting run flat tyres.

Vehicle manufacturers conduct their own tests based on specific vehicle models, taking into consideration vehicle weight and characteristics and can decide together with the tyre manufacturer can suggest an increased distance for that specific vehicle.

For vehicles fitted with Pirelli self-supporting Run Flat tyres as original equipment, the tyre manufacturer's recommendations indicated in the owners manual apply.